KVTS Transformer Test Set Selector Switch

Test the full VT range of your Knopp 2J4 and 2J6 Uniload sets from one KVTS console, with one switch and no rewiring.
The TESCO Transformer Test Set Selector Switch lets a single Knopp KVTS-A or KVTS-II console run either the 2J4-4 or the 2J6-3 Uniload transformer set. Turning the XFMR SELECT switch moves the console’s supply, sense and interlock circuits to the chosen set. Meter shops can test voltage transformers from 120 V to 36,000 V primary without moving a cable between tests.

×

Description


Features and benefits

  • One-switch changeover. Select 2J4, OFF or 2J6 from the front panel. No cable swaps and no changes to the console or the transformer sets.
  • Faster test setup. Technicians connect only to the transformer under test, then set the ratio at the selected set’s T-bar as usual.
  • Only one set is ever connected. Break-before-make relay switching moves every supply, polarity and secondary-sense conductor together.
  • Interlocked OFF position. OFF isolates both sets and opens the KVTS interlock, so test voltage can’t be applied.
  • Clear status at a glance. Green pilot lamps show the selected set, and a KVTS READY lamp confirms the interlock is made.
  • No facility power needed. The switch runs on 120 VAC control power from the KVTS console.
  • Built and installed by TESCO. Factory-built, labeled 600 V cable sets are cut to your site. Installation and commissioning are on site and include a reference VT test in each position.

 

Compatible with: Knopp KVTS-A and KVTS-II consoles; Knopp 2J4-4 and 2J6-3 Uniload sets
Enclosure: 16 x 14 x 6 in. UL Type 12 steel, wall or post mount, approx. 35 lb

Top Best Sellers

Disclaimer:

TESCO Metering reserves the right to modify product designs, specifications, features, and documentation at any time as part of our continuous improvement process. All information is provided “as is” and may change without prior notice. While TESCO Metering® strives for accuracy, completeness, and technical reliability, customers should verify the latest product details before making purchasing or engineering decisions. For confirmation of current specifications or application suitability, please contact TESCO Metering® directly.